Some fresh 3D details for your printing pleasure (Patreon)

https://drive.google.com/drive/u/1/folders/1Qz8uvCPM9AihsbJxO_t19NvahY4SEPAn

My friends, here are some simple bricks in 1/35th scale but more importantly, T-55/T-62 fuel line connectors! I modelled those in 1/48th scale so keep that in mind while printing, you'll have to make them slightly larger in the slicer software for 1/35th models. They're designed to fit a 0.3mm wire inside. Also, it's advisable to print them horizontally so you don't have to drill out the openings! Bricks can be printed at any angle, I did them vertically and they were easy to remove from supports - just break them off and you're good to go!